Detailed Product Description

Attributes:

High vapour permeability
Contains no solvents
Ready to use
Ensures uniform heat distribution
Improves acoustics
Resistant to scrubbing
Does not pick up dirt or nicotine
Ensures no dew on surfaces
Inhibits development of mold and fungus

Use:

In residential and office rooms to provide optimal comfort and atmosphere and to generate savings in energy consumption. In rooms exposed to heavy loads such as school classrooms, kindergarten and hotel rooms in order to obtain improved resistance. In rooms of high air humidity or poor ventilation such as kitchens, indoor swimming pools, bathrooms, processing plants where anti-condensation coatings are required.

Color:

Paint can be coloured using water paint pigments or general-purpose pigments. Before adding a pigment, products must be checked for mutual tolerance (using small samples). 

Ingredients:

Water, acrylic dispersion, ceramic fillers, additives.

Capacity:

20l

Wear and Tear:

Theoretical spreading rate 1,47 m2/l. PRACTICAL SPREADING RATE depends on application method, surface conditions, overspray etc.

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5°C and +30°C. Protect against frost. 

Method of use:

Stir well before use. Remove poor quality and peeling coats, cover bare areas. Surface without flakes must be cleaned of dust and washed. Wet or damp plasters must be dried before coating. Substrates of high absorptivity and low mechanical strength must be primed using primer. The coating is applied to prepared substrate using long nap roller or hydrodynamic spray. Brush may be used when painting small areas. In order to obtain appropriate coats paint must be applied crosswise. When spraying the paint must be applied in the same direction to obtain successive coats. After use wash the tools under running water. Application of 2 to 3 coats is recommended (next coat can be applied after approximately 2 hours). Apply when both substrate and ambient temperatures are above +5°C during the entire drying time. Low temperature and high air humidity make the drying time longer. Recommended thickness of dry layer 300 µ.

Technical parameters:

Viscosity           15000 ± 3000mPa*s Brookfield 20rmp disc 5
Density              1,1 ± 0,05kg/dm3
pH                     8-9
Drying time        1 h
Reflectance        88%
Emittance          94%
Shelf life       2 years from date of manufacture if stored in a closed container at                                suitable temperature

Tools:

Brush, nap roller, hydrodynamic spray  

Notes:

The information of this data sheet is, normative and based on laboratory tests and practical experience. Hirsch-Pol guarantee that the product quality conforms to our quality system. 

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for metal waste. 

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S25 Avoid contact with eyes.