Detailed Product Description

Attributes:

Resistant to extreme temperatures
Bridges cracks
Suppresses noise
Contains no solvents
Reflects approx. 90 % of the solar radiation
Reduces air conditioning costs
Picks up no dirt and does not get decolourized
High vapour permeability level
Resistant to acid rains, salt spray and smog

Use:

Recommended where building is to be protected from excessive heating up. Due to its properties it is to be used where adverse weather conditions prevail such as: salt spray, frequent precipitations or significant temperature variations. Recommended where aggressive air pollutants are present, in industrial areas (acid rain, smog etc.) Paint intended for painting facade walls made of cement plaster, cement and lime plaster, concrete, brick, wood and wood-based materials after prior priming with acrylic primer.

Color:

Paint can be coloured using water paint pigments or general-purpose pigments. Before adding a pigment, products must be checked for mutual tolerance (using small samples) and resistance to UV radiation. 

Ingredients:

ceramic filler, acrylic resin, additives, water

Capacity:

20l

Wear and Tear:

Theoretical spreading rate   1,47 m2/l. PRACTICAL SPREADING RATE depends on application method, surface conditions, overspray etc.

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5?C and +30?C. Protect against frost. 

Method of use:

Stir well before use. Remove poor quality and peeling coats, cover bare areas. Surface without flakes must be cleaned of dust and washed. Wet or damp plasters must be dried before coating.The coating is applied to prepared substrate using long nap roller or hydrodynamic spray. Brush may be used when painting small areas. In order to obtain appropriate coats paint must be applied crosswise. When spraying the paint must be applied in the same direction to obtain successive coats. After use wash the tools under running water. Application of 2 to 3 coats is recommended (next coat can be applied after approximately 2 hours). Recommended thickness of dry layer   300 ?. Apply when both substrate and ambient temperatures are above +5?C during the entire drying time. Low temperature and high air humidity make the drying time longer.

Technical parameters:

Viscosity           15000 ?  3000 mPa*s Brookfield 20rmp disc 5
Density              1,1 ? 0,05kg/dm3
pH                     8-9
Drying time         2 h
Reflectance        88%
Emittance          94%
Shelf life             2 years from date of manufacture if stored in a closed container at                           suitable temperature

Tools:

Brush, nap roller, hydrodynamic spray  

Notes:

The information of this data sheet is, normative and based on laboratory tests and practical experience. Hirsch-Pol guarantee that the product quality conforms to our quality system. 

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for metal waste. 

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S25 Avoid contact with eyes.