Detailed Product Description

Attributes:

Ready for use
Does not clog abrasive paper
Quick-drying
perfectly smooth, dull surfaces
Perfect adhesion to the substrate,
High permeability for water vapor and air
Maximum thickness of a single layer: 3 mm
For indoor use
Environmentally friendly

Use:

Used as a surfacer for finishing coats and for filling small voids, cracks and irregularities of indoor walls and ceilings. For use on substrates made of mineral plaster, drywall, wood and wood-based materials not exposed to moisture. The obtained surfaces are suitable as an undercoat for acrylic, silicone paints and alkyd paints.

Color:

White. Putty can be colored with water paint pigments or multi-purpose pigments. Before adding pigment check the mutual tolerance of products with a small sample

Ingredients:

Water, styrene-acrylic dispersion, filler, pigments.

Capacity:

25kg

Wear and Tear:

~1.7 kg/m2  for layer thickness of 1 mm

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5°C and +30°C. Protect against frost. 

Method of use:

Substrate must be clean, dry, free from dust and other loose particles and of good mechanical strength. Brittle and absorptive substrates must be strengthened with acrylic primer. Remove any organic impurities with suitable preparations. In the event of strong unevenness, if a thick layer must be obtained at the same time, use a coarse-grained putty initially. Apply the putty using a putty knife, roller, or mechanical spraying device. You can reapply putty once the previous layer is dried, i.e. after 3-4 hours. Low temperatures can extend the drying time to up to 12 hours. After drying polish the surface with abrasive paper or mesh, remove dust and apply paint. New plasters must be dry after seasoning. Do not use below +5°C. 

Technical parameters:

Viscosity                   90000 ± 10000 mPa*s Brookfield 20rmp, disc 7
Density                      1,70 ± 0,05 kg/dm3
pH                             8,5 ± 0,2
Drying time               ~2-3 h for 1 mm thickness
Shelf life                     36 months
 
Maximum thickness of a single layer  3 mm
Applying time of the next layer   3- 4 h 

Tools:

Putty knife, roller, airless spraying device. Wash the tools with water after work.

Notes:

All information related to the product is provided for the ambient temperature of +20°C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5°C and +25°C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste. 

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.