Detailed Product Description

Attributes:

Destroys microorganisms and bacteria
Prevents formation of fungi, mildew, moss, lichen, algae and other
Removes organic pollutants
Immediate and forceful action
Guaranteed effect
For indoor use

Use:

Intended for indoor use on substrates made of plaster, concrete, brick, ceramics, eternit, wood, glass, natural and artificial stone, and also on silicone joints and emulsion paint coats. When used on coloured substrates discolouration may occur therefore a test must be carried out on a small area.

Color:

Yellowish, transparent.

Ingredients:

The preparation is a solution of biologically active agents and auxiliary chemicals which support their action. Contains sodium hypochlorite (5% of active chlorine). 

Capacity:

0,5l

Wear and Tear:

Depending on surface condition

Transport and Storage:

RID ADR: UN1791, class 8, Warning label 8, packaging class II Store cool in tight container, at a temperature between  +5?C and +25?C. 

Method of use:

Pre-clean heavily overgrown surfaces with brush. Once so prepared spray the surface with the preparation from a distance of approx. 15 - 20 cm. Start the removal of tarnish after 15 min. Spray heavily soiled surfaces 2-3 times at 15 min. intervals. Wash the residues with water. Preparation can be applied with brush or by spraying. Also the reasons for mildew formation must be eliminated.

Technical parameters:

Viscosity                  20 ? 10 mPa*s Brookfield 20rmp disc 1
Density                    1,10 ? 0,05 kg/dm3
pH                           11,0 ? 0,02
Shelf-life                  12 months

Tools:

Spray gun, brush. Wash the tools with water after work.

Notes:

All information related to the product is provided for the ambient temperature of +20?C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5?C and +25?C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste.

Safety measures:

R31      - Contact with acids liberates toxic gas
R36/38 - Irritating to eyes and skin
S 1/2    - Keep locked up and out of the reach of children
S 3/7    - Keep container tightly closed in a cool place
S 25     - Avoid contact with eyes
S 26     - In case of contact with eyes, rinse immediately with plenty of water and seek
               medical advice
S 28     - After contact with skin, wash immediately with plenty of water
S 46     - If swallowed, seek medical advice immediately and show this container or label
S 50     - Do not mix with acids