Detailed Product Description

Attributes:

Ready for use
Dull surfaces
Perfect adhesion to the substrate,
High permeability for water vapor and air
High resistance to moisture and water
Maximum thickness of a single layer: 3 mm
For indoor use
Environmentally friendly  

Use:

Used as an undercoat for finishing coats or as a surfacer and for filling small voids, cracks and irregularities of indoor walls and ceilings. For use on substrates made of mineral plaster, drywall, wood and wood-based materials exposed to moisture in rooms like kitchens or bathrooms. The obtained surfaces are suitable as an undercoat for acrylic, silicone paints and alkyd paints.

Color:

White.

Ingredients:

Water, styrene-acrylic dispersion, filler, pigments.

Capacity:

25kg

Wear and Tear:

~1.6 kg/m2  for layer thickness of 1 mm

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5?C and +30?C. Protect against frost. 

Method of use:

Substrate must be clean, dry, free from dust and other loose particles and of good mechanical strength. Brittle and absorptive substrates must be strengthened with acrylic primer. Remove any organic impurities with suitable preparations. Apply the putty using a putty knife, roller, or mechanical spraying device. You can reapply putty once the previous layer is dried, i.e. after 3-4 hours. Low temperatures can extend the drying time to up to 12 hours. Apply evenly, because of high resin content the product is difficult to grind. After drying polish the surface with abrasive paper or mesh, remove dust and apply paint. New plasters must be dry after seasoning. Do not use below 5?C.

Technical parameters:

Viscosity                   85000 ? 10000 mPa*s Brookfield 20rmp, disc 7
Density                     1,70 ? 0,05 kg/dm3
pH                             8,5 ? 0,2
Drying time               ~2-3 h for 1 mm thickness
Shelf life                    36 months
 
Maximum thickness of a single layer   3 mm
Applying time of the next layer   3-4 h 

Tools:

Putty knife, roller, airless spraying device. Wash the tools with water after use.

Notes:

All information related to the product is provided for the ambient temperature of +20?C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5?C and +25?C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste. 

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.