Detailed Product Description

Attributes:

To be diluted at 1:4 ratio
Steam- and gas-permeable coats
Controls substrate absorbing capacity grade
Prevents excessive absorption of water from coats applied
Improves substrate solidity
Reduces paint consumption
For indoor and outdoor use
Environmentally friendly

 

Use:

Intended for priming and reinforcing all absorbent, absorptive, weak and dusty substrates made of concrete, bricks, hollow bricks, aerated concrete, drywall, gypsum- and cement and lime plaster. Recommended for walls and floors to be used as a primer for ceramic tiles, plasters, cement mortar, concrete floors and paints. If used under wallpaper facilitates later wallpaper removal.

 

Color:

Transparent.

 

Ingredients:

Preparation is a water dispersion of styrene - acrylic resin with addition of performance chemicals.

 

Capacity:

1l; 5l

 

Wear and Tear:

Depending on substrate absorbing capacity approx. 5 -20 m2/l diluted, single coat.
 

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5°C and +30°C. Protect against frost.

 

Method of use:

Concentrated primer to be diluted with water at 1:4 ratio (1 part of primer and 4 parts of water). Thoroughly clean the surface, remove old, poorly adhering coats before priming. Fill any voids and cracks with putty after application of the primer. Apply primer in one pass using brush or roller. Repeat for increased absorbing-capacity substrates by applying second coat on the surface while still wet. Carry out priming at ambient and surface temperatures above +5°C. Paint and acrylic plaster can be applied after 12 hours.  

 

Technical parameters:

Viscosity             50 ± 10 mPa*s Brookfield 20rmp disc 1
Density               1,00 ± 0,05 kg/dm3
pH                       8,5 ± 0,2
Drying time         ~ 2 h
Shelf-life             12 months

 

Tools:

Brush, roller. Wash the tools with water after work.

 

Notes:

All information related to the product is provided for the ambient temperature of +20°C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5°C and +25°C, while relative humidity does not exceed 80%.

 

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste.

 

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.