Detailed Product Description

Attributes:

High adherence to substrate
Easy to use
For wood and plaster
Produces smooth surfaces
Maximum thickness of a single layer: 1 mm
Environmentally friendly
For indoor and outdoor use

Use:

For levelling small crevices, scratches and cracks. Thanks to increased hardness and adherence intended for indoor and outdoor use for the following substrates: mineral plasters, drywalls, wood-based materials; particularly recommended for restoration of construction woodwork. The surfaces achieved are smooth, matt, well adhering to the substrate and provide perfect undercoat for acrylic and silicone paints and alkyd paints.

Color:

White.

Ingredients:

Water, styrene - acrylic dispersion, fillers, pigments, additives.

Capacity:

400g; 800g; 1600g

Wear and Tear:

~1,5 kg/m2  for layer thickness of 1 mm.

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5?C and +30?C. Protect against frost. 

Method of use:

Substrate must be clean, dry, free from dust and other loose particles and of good mechanical strength. Brittle and absorptive substrates must be strengthened with acrylic primer. Remove any organic impurities using suitable preparations.  Apply putty with putty knife or float. Where the surface irregularities are more severe reapply putty once the previous layer is dried i.e. after 3-4 hours. Polish the surface, remove dust and apply paint. New plasters must be dry after seasoning. Do not use below 5?C.

Technical parameters:

Viscosity                      75 000 ? 10 000 mPa*s Brookfield 20rmp, disc 7
Density                        1,70 ? 0,05 kg/dm3
pH                                8,5 ? 0,2
Drying time                  3-4 h for 1 mm thickness
Shelf life                      36 month

Tools:

Spatula, steel or plastic float. Clean tools under water after work.

Notes:

All information related to the product is provided for the ambient temperature of +20?C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5?C and +25?C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste. 

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.