Detailed Product Description

Attributes:

White when dry
Does not clog abrasive paper
Quick-drying
Produces perfectly smooth surfaces
Maximum thickness of a single layer: 1 mm
Environmentally friendly
For indoor use

Use:

Used as a surfacer for finish coats. Intended for filling small voids, cracks and irregularities of indoor walls and ceilings. For use on substrates made of mineral plaster, drywall, wood and wood-based material. Resultant surfaces are smooth, mat, perfectly adhere to substrate to provide perfect undercoat for acrylic and silicone paints and alkyd paints.

Color:

White.

Ingredients:

Water, styrene - acrylic dispersion, fillers, pigments, additives.

Capacity:

16kg; 5kg; 8kg; 18kg

Wear and Tear:

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5°C and +30°C. Protect against frost.

Method of use:

Substrate must be clean, dry, free from dust and other loose particles and of good mechanical strength. Brittle and absorptive substrates must be strengthened with acrylic primer. Remove any organic impurities using suitable preparations.  Apply putty with putty knife or float. Where the surface irregularities are more severe reapply putty once the previous layer is dried i.e. after 3-4 hours. Polish the surface, remove dust and apply paint. New plasters must be dry, after seasoning. Do not use below 5°C.

Technical parameters:

Viscosity                                 75 000 ± 10000 mPa*s Brookfield 20rmp disc 7
Density                                   1,70 ± 0,05 kg/dm3
pH                                           8,5 ± 0,2
Drying time                             ~3 h for 1 mm thickness
Shelf life                                  36 month
Maximum thickness of a single layer: 1 mm

Tools:

Spatula, steel or plastic float. Clean tools under water after work.

Notes:

All information related to the product is provided for the ambient temperature of +20°C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5°C and +25°C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste.

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.