Detailed Product Description

Attributes:

High adherence to substrate
Easy to apply and polish
Produces smooth surfaces
Maximum thickness of a single layer: 2 mm
Environmentally friendly
For indoor use

Use:

For filling crevices, scratches and cracks of small width and depth and for finish polishing of larger, particularly rough, surfaces. Thanks to increased hardness and adherence intended for various substrates and their connections e.g. wood, plaster, concrete, brick, structural clay products, wood-based materials etc. Suitable as an undercoat for acrylic and silicone paints and alkyd paints. For indoor use.

Color:

White.

Ingredients:

Water, styrene - acrylic dispersion, fillers, pigments, additives.

Capacity:

400g

Wear and Tear:

~1,5 kg/m2  for layer thickness of 1 mm.

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5?C and +30?C. Protect against frost. 

Method of use:

Substrate must be clean, dry, free from dust and other loose particles and of good mechanical strength. Brittle and absorptive substrates must be strengthened with acrylic primer. Remove any organic impurities using suitable preparations.  Apply putty with putty knife or float. Where the surface irregularities are more severe reapply putty once the previous layer is dried i.e. after 3-4 hours. Polish the surface, remove dust and apply paint. New plasters must be dry, after seasoning. Do not use below 5?C.

Technical parameters:

Viscosity                  84 000 ? 10000 mPa*s Brookfield 20rmp disc 7
Density                    1,70 ? 0,05 kg/dm3
pH                           8,5 ? 0,2
Drying time              3-4 h for 1 mm thickness
Shelf life                  36 month
Maximum thickness of a single layer: 2 mm

Tools:

Spatula, steel or plastic float. Clean tools under water after work.

Notes:

All information related to the product is provided for the ambient temperature of +20?C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5?C and +25?C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste. 

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.