Detailed Product Description

Attributes:

Resistant to weather conditions
High adherence to substrate
Easy to apply
Maximum thickness of a single layer: 5 mm
Environmentally friendly
For indoor and outdoor use

Use:

Intended for levelling large voids and irregularities on surfaces made of concrete, aerated concrete, gypsum, cement plaster, lime and cement plaster, gypsum plaster, drywalls, on wood and wood-based materials. Particularly recommended for repairs of facades and as an undercoat for paint and lacquer coats, wallpapers and mineral or acrylic plasters. For indoor and outdoor use.

Color:

White.

Ingredients:

Water, styrene - acrylic dispersion, fillers, pigments, additives.

Capacity:

400g

Wear and Tear:

~1,5 kg/m2  for layer thickness of 1 mm.

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5°C and +30°C. Protect against frost. 

Method of use:

Substrate must be clean, dry, free from dust and other loose particles and of good mechanical strength. Brittle and absorptive substrates must be strengthened with acrylic primer. Remove any organic impurities using suitable preparations.  Once squeezed out of the tube apply putty with putty knife or float. Pre-polish. Where the voids are larger reapply putty once the previous layer is dried i.e. after 3-4 hours. Once dry polish the surface with sand paper. Do not use below 5°C.

Technical parameters:

Viscosity                              120 000 ± 10 000 mPa*s Brookfield 20rmp disc 7
Density                                1,75 ± 0,05 kg/dm3
pH                                        8,5 ± 0,2
Drying time                          3-4 h for 1 mm thickness
Shelf life                              36 months
Maximum thickness of a single layer: 5 mm

Tools:

Spatula, steel or plastic float. Clean tools under water after work.

Notes:

All information related to the product is provided for the ambient temperature of +20°C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5°C and +25°C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste. 

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.