Detailed Product Description

Attributes:

Resistant to weather
High adherence to substrate
Easy to apply and process
Maximum thickness of a single layer: 1 mm
Environmentally friendly
For indoor and outdoor use

Use:

Intended for filling cracks and voids in wood and wood-based materials, smoothing irregularities in floor surfaces, wood panelling and furniture. After filling it can be coated with lacquer or paint. For indoor and outdoor use. 

Color:

White, beech-brown, oak-brown, dark pine-brown, light pine-brown, nut-brown.

Ingredients:

Water, styrene - acrylic dispersion, fillers, pigments, additives.

Capacity:

250g; 300g

Wear and Tear:

~1,5 kg/m2  for layer thickness of 1 mm.

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5°C and +30°C. Protect against frost. 

Method of use:

Substrate must be clean, dry, free from dust and other loose particles and of good mechanical strength. Remove any organic impurities using suitable preparations.  Squeeze putty onto prepared surface, smooth with putty knife and, once dry, polish with abrasive paper. Where the crevices are larger than 1 mm apply putty gradually. Each next layer can be applied once the previous one is dried i.e. after 2 hours. Do not use below 5°C.

Technical parameters:

Viscosity                                  120 000±10 000 mPa*s Brookfield 20rmp disc 7
Density                                    1,50 ± 0,05 kg/dm3
pH                                            8,5 ± 0,2
Drying time                              2-4 h for 1 mm thickness
Shelf life                                  36 month
Humidity of wood                     6-15%
Maximum thickness of a single layer: 1 mm

Tools:

Spatula, steel or plastic float. Clean tools under water after work.

Notes:

All information related to the product is provided for the ambient temperature of +20°C and for humidity of wood from 6% to 15% in relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5°C and +25°C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste.

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.