Detailed Product Description

Attributes:

For indoor use
Perfectly adheres to substrate
Strong and durable bonds
Water-soluble
Quick-drying
Environmentally friendly

Use:

Intended for gluing indoor elements made of styrofoam e.g decorative ceiling tiles, decorative borders, screens behind radiators, insulating boards for typical constructional substrates such as brick, concrete, cement, cement and lime plaster, drywall, wood etc.

Color:

Transparent.

Ingredients:

Water, styrene - acrylic dispersion, performance additives, fillers.

Capacity:

350g

Wear and Tear:

Depending on application method.

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5?C and +30?C. Protect against frost. 

Method of use:

Surface to be glued must be clean, dry, solid, sand-papered and free from dust. Poorly adhering parts must be removed. High absorbing capacity and poor mechanical strength substrates must be primed with acrylic primer. Any organic impurities must be removed using appropriate preparations. Glue is ready to use. Before gluing check whether the parts to be glued fit closely to each other. Apply glue as spots on the styrofoam layer or as strips along long and thin parts. Press the part being glued to the substrate and slide it slightly over the surface to spread the glue over the largest possible area. Immediately wipe any excess glue, which got out of the parts being glued, with wet cloth. Once dry glue can be e.g. painted. Do not use below +5?C.

Technical parameters:

Viscosity                80000 ? 10000 mPa*s Brookfield 20rmp disc 7
Density                   1,45 ? 0,05 kg/dm3
pH                          8,5 ? 0,2
Drying time             Pre-drying  20-40 minutes
                             Full hardening of glue 24-48 hours
Shelf-life                 24 months

Tools:

Brush, float. Wash the tools with water after work.

Notes:

All information related to the product is provided for the ambient temperature of +20?C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5?C and +25?C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste.

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.