Detailed Product Description

Attributes:

Quick-drying
Contains no solvents
Cork-colour bonds
Indoor use
Environmentally friendly 
Use:

The glue is intended for fastening of cork products e.g. wall and floor coverings, decorative trims, to indoor substrates made of brick, concrete, cement, cement and lime plaster, drywall etc.

Color:

Light brown

Ingredients:

Water, styrene acrylic dispersion, filling materials, colours, performance additives

Capacity:

800g; 1500g; 4kg 

Wear and Tear:

Depending on application method.

Transport and Storage:

Store in tightly closed containers at temperature from +5?C to +30?C. Protect from frost.

Method of use:

Substrate to be glued must be dry, clean and free from dust. Remove any loose or chipping particles. Remove dust and wash the surface. Coat highly absorptive and poor strength substrates with acrylic primer.
Stir the product well before use. When used as paint, apply the product on a prepared surface using roller or brush. Let moist surfaces dry before gluing. Apply glue using putty knife with small
(3-4 mm) teeth over such an area which can be covered with a covering within 10 minutes. Press cork firmly to the edges and press on with a roller. Remove excess glue, which got out of the parts being glued, with wet cloth. The glue is ready to use. Before application thoroughly check if the parts to be joined match. Finished surfaces can be varnished after min. 48 hours. 

Technical parameters:

Viscosity           80000 ? 10000 mPa*s Brookfield 20rmp, disc 7
Density             1.65 ? 0.05 kg/dm3
pH                    8.5 ? 0.2
Drying time       primary drying after approx. 20-40 minutes                                                                                        
                       full curing after 24-48 hours
Shelf life           24 months

Tools:

Putty knife, steel float with small teeth. Wash with water after use.

Notes:

All product data are given for ambient temperature of + 20?C and relative air humidity of 60%. Where work is carried out in different conditions the product drying time will be longer or shorter. Application should be performed if the ambient and substrate temperatures are within the range of +5?C to +25?C with relative air humidity not exceeding 80%.

Recycling:

The best way to dispose of the remainder of the product is to use it up or pass it to someone else. Do not dump in sewage system. Dispose of container in plastic container waste disposal site.

Safety measures:

Product not classified as hazardous. Use regular protective measures: glasses, gloves, protective clothing.
Safety statements:
S 2 Keep out of the reach of children
S 25 Avoid contact with eyes