Detailed Product Description

Attributes:

Protective and decorative coats
High permeability for water vapor and gases
High mechanical strength
Good plasticity and adherence to substrate
Grooved structure coat
Resistant to weather conditions
Manufactured in three granulations: 1.5; 2; 2.5mm
Indoor and outdoor use
Environmentally friendly  

Use:

Used on substrates made of lime and cement plaster, drywall, concrete, wood, and wood-based materials on indoor and outdoor building walls. Particularly recommended for applying on reinforced layers in heat insulation systems, use of this type of plaster ensures high quality of finish.  

Color:

White. Putty can be colored with pigments intended for water paints or multi-purpose pigments.  Also available in selected colors according to the color chart. 

Ingredients:

Water, styrene-acrylic dispersion, performance additives, aggregate.

Capacity:

9kg; 20kg

Wear and Tear:

approx.  1,5 kg/m2 of plaster depending on the surface thickness.  

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5°C and +30°C. Protect against frost. 

Method of use:

Substrate must be clean, dry, free from dust and other loose particles and of good mechanical strength. Brittle and absorptive substrates must be strengthened with acrylic primer. Remove any organic impurities with suitable preparations. Apply a layer of the putty of thickness corresponding to the size of the largest grain of the filler used onto the prepared surface, using a smooth steel float. Paint layer thickness should be 1-2 mm. Put excess paint back to the container. When the applied layer is even and uniform, finish the surface using a plastic float, making vertical, horizontal or circular movements, depending on the structure that is to be obtained. Apply only a slight force to the float. Plaster drying time depends on the ambient temperature and the absorbing capacity of the substrate. Apply the plaster using the wet-on-wet technique, not allowing the previously floated putty to dry up at the edges of the layer.

Technical parameters:

Viscosity                75000 ± 10000 mPa*s Brookfield 20rmp disc 7
Density                  1,82 ± 0,05 kg/dm3
pH                         8,5 ± 0,2
Drying time            12-24 h
Shelf life                36 months
The thickness of plaster depends on thickenss of aggregate

Tools:

Notes:

All information related to the product is provided for the ambient temperature of +20°C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5°C and +25°C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste.

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.