Detailed Product Description

Attributes:

Easy to use
Durable bonds
Quick-drying
Contains no solvents, odourless
Flexible, transparent
Resistant to water penetration
Environmentally friendly
For indoor use

 Use:

Intended for wood chipboards, MDF boards, plywood, fibreboard and other wood-based materials. Can be used for gluing several layers of wood and non-load carrying structural elements. Suitable for gluing elements exposed for short-time to trickling water or condensation water and high humidity. For indoor use.

 Color:

Transparent.

 Ingredients:

Water, polyvinyl acetate dispersion with addition of auxiliary chemicals.

 Capacity:

110g; 225g; 250g

 Wear and Tear:

Depending on the application method.

 Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5?C and +30?C. Protect against frost. 

 Method of use:

Surface to be glued must be clean, free from greasy stains and dust and dry. Glue is ready-to-use. If thickened due to evaporation 2 -3 % of water can be added to achieve previous consistency. Before gluing check if the objects to be bonded fit closely to each other. Apply glue on one side, directly from the packaging and then spread it with brush or putty knife. When gluing hard wood or where the surface is very porous apply glue on both sides. Upon application of glue join and press the surfaces being glued towards each other for approx. 15 minutes. Remove excess glue with damp cloth. Total hardening time is 24-48 hours. Do not use below 5?C.

 Technical parameters:

Viscosity               19000 ? 5000 mPa*s Brookfield 20rmp disc 7
Density                  1,05 ? 0,05 kg/dm3
pH                         8,5 ? 0,2
Drying time            pre-drying after approx. 20-40 minutes
                             full hardening after approx. 24-48 hours
Humidity of wood    6-15%
Shelf-life                24 months

 Tools:

Brush, putty knife. Wash the tools with water after work.

 Notes:

All information related to the product is provided for the ambient temperature of +20?C and for humidity of wood from 6% to 15% in relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5?C and +25?C, while relative humidity does not exceed 80%.

 Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste. 

 Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.