Detailed Product Description

Attributes:

Protective and decorative coats.

High permeability for water vapor and gases.

Good adherence to substrate.
Indoor and outdoor use.

For different types of mineral substrates.

Environmentally friendly. 

By using special rollers or spraying devices it produces the sheep fleece surface quality during application.

Use:

Intended for use on building walls made of cement-lime plasters, drywall, concrete, wood and wood derivative materials. There are two versions available, for indoor and outdoor use, respectively.

Color:

White. Plaster can be colored by the user with water paint pigments or multi-purpose pigments.

Ingredients:

Water, styrene-acrylic dispersion, fillers, pigments, additives.

Capacity:

9kg; 20kg

Wear and Tear:

approx.  1-2 kg/m2 of plaster depending on the application technique.   

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5°C and +30°C. Protect against frost. 

Method of use:

Substrate must be clean, dry, free from dust and other loose particles and of good mechanical strength. Brittle and absorptive substrates must be strengthened with acrylic primer. Remove any organic impurities with suitable preparations. Apply a layer of the plaster of thickness corresponding to the size of the largest grain of the filler used onto the prepared surface, using a smooth steel float. Paint layer thickness should be 1-2 mm. Put excess paint back to the container. When the applied layer is even and uniform, finish the surface using a plastic roller, making vertical movements, gently pressing the roller against the substrate, thus adjusting the height of the fleece structure. Plaster drying time depends on the ambient temperature and the absorbing capacity of the substrate. Apply the plaster using the wet-on-wet technique, not allowing the previously floated plaster to dry up at the edges of the layer.

Technical parameters:

Viscosity                80000 ± 10000 mPa*s Brookfield 20rmp disc 7
Density                  1,80 ± 0,05 kg/dm3
pH                         8,5 ± 0,2
drying time             12-24 h
Shelf life                 36 months

Tools:

Smooth steel float, roller, spraying device Wash the tools with water after work.

Notes:

All information related to the product is provided for the ambient temperature of +20°C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5°C and +25°C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste. 

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes