Detailed Product Description

Attributes:

Increased colouring power
Resistance to weather and UV radiation
High resistance to colour change
Indoor use and outdoor use (selected colours)
Environmentally friendly

Use:

Ready-made decorative, acrylic paint with intense tint. Can be used as a colouring pigment for paints and water-soluble plasters or as a paint for protective and decorative painting of billboards, inscriptions and signs on substrates made of mineral plasters, brick, concrete, wood or wood-based materials.  Intended for indoor use and outdoor use (selected colours only).

Color:

Indoor: orange, salmon, maroon, apricot, red,
Multi-purpose: yellow, sunny yellow, violet, blue, navy-blue, light nut-brown, medium  nut-brown, brown, olive, green.

Ingredients:

Water, styrene - acrylic dispersion, fillers, pigments, additives.

Capacity:

250ml; 500ml

Wear and Tear:

Depending on the colour expected. 

Transport and Storage:

The product should be stored in sealed packaging in temperatures between +5°C and +30°C. Protect against frost. 

Method of use:

Remove poor quality coats from the substrate and fill any voids. Remove dust, wash and let dry. Coat highly absorptive and poor strength substrates with acrylic primer. Stir the product well before use. When used as a paint, apply the product on a prepared surface using roller or brush.
When colouring paints perform a test using small amount (approx. 100g), to check mutual tolerance of products and to establish proper ratio. Paint the test sample on a wall and let dry; colour can be corrected to achieve desired effect by adding pigment or coloured paint. However, the amount of pigment must not exceed 10% of volume of the paint to be coloured and, where used for colouring of plaster, maximum of 3% of pigment can be added. To avoid colour differences whole of the paint to be used must be coloured at once. Painting and drying should take place at ambient and surface temperatures not lower than  +5ºC. 

Technical parameters:

Viscosity               10000 ± 2000 mPa*s Brookfield 20rmp disc 5
Density                 1,30  -1,40 kg/dm3
pH                        7,5  - 8,5
Shelf life               36 months

Tools:

Brush, roller, spray plant. Clean tools under water after work.

Notes:

All information related to the product is provided for the ambient temperature of +20°C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5°C and +25°C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste.

Safety measures:

This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.