Detailed Product Description

Attributes:
Very high vapour permeability
Good adhesion to substrate
Resistant to soiling
Produces structure resistant to weather by forming a chemical bond with the substrate
Durable, strong coats
Enhanced hydrophobic properties
Very high resistance to scrubbing and ageing of coats
Possibility to paint walls with on-going carbonization process
Outdoor use
Environmentally friendly
Allowing quick start of painting works on freshplasters without a risk of the coat being damaged by the alkaline reaction ofthe substrate.

Use:
Intended for painting facade walls made of concrete, cement and lime plaster, brick, clinker and all practically used mineral substrates where high quality and durability of coat is required. Particularly recommended for restoration of monumental buildings and painting fresh, unseasoned plasters (wet-on-wet technique).

Color:
White. Available in desired colours on request.

Ingredients:
Water, styrene and acrylic dispersion, potassium water-glass, hydrophobic substances, fillers, additives.

Capacity:
3l; 5l; 10l

Wear and Tear:
8-10 m2/l single coat, depending on surface and painting tool used.

Transport and Storage:
The product should be stored in sealed packaging in temperatures between +5?C and +30?C. Protect against frost.

Method of use:
Substrate to be painted must be dry, clean, and free from dust and loose particles and of good strength. Brittle and very absorptive substrates must be primed with silicate primer. Remove old, poor quality coats and fill voids and cracks. Remove any organic impurities with suitable preparations.  Stir the paint well before use. Apply with brush, roller or spray station. It is recommended to apply 1-2 coats. First priming coat can be in the form of paint diluted with water at 1:2 ratio, while the finish coat should not be diluted. Dilution of finish coat paint will cause impairment or loss of paint parameters and a change in colour shade. Next coat can be applied once the previous one is dry i.e. after approx. 2 hours. Apply at substrate and ambient temperatures above +5?C. 

Technical parameters:
Viscosity             10000 ? 2000 mPa*s Brookfield 20rmp disc 5
Density               1,43 ? 0,05kg/dm3
pH                      12,0 ? 0,2
Drying time         approx. 2 h
Shelf life             24 months

Tools:
Brush, roller, spray plant. Clean tools under water after work.

Notes:
All information related to the product is provided for the ambient temperature of +20?C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5?C and +25?C, while relative humidity does not exceed 80%.

Recycling:
The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for plastic waste.

Safety measures:
This product is not classified as hazardous. Use normal protective means: glasses, gloves, anti-stain protective clothing.
Security phrases:
S 2 Keep out of reach of children.
S 25 Avoid contact with eyes.