Detailed Product Description

Attributes:
Very good adherence to substrate
Durable, mat coats
High mechanical strength
Resistant to weather and industrial pollution
Contains no chromium and lead compounds
For indoor and outdoor use

Use:
Intended for initial painting of cast iron and steel surfaces. Recommended for use on steel structure surfaces in the period between their manufacturing and completion of assembly works. Applied as a primer for topcoat paints and enamels to enhance their protective and anticorrosive properties.

Color:
Red oxide, grey, black, green.

Ingredients:
Painter's naphtha, alkyd resin, pigments, additive, fillers.

Capacity:
0,5l; 1l; 5l; 10l

Wear and Tear:
For alkyd products: up to 12 m2/l, single coat, depending on surface type and painting tool used.

Transport and Storage:
RID ADR: UN 1263, class 3 item 31 c, Warning label 3, packaging class III Store in tight containers, in a cool place, at the temperature between +5?C and +25?C.

Method of use:
Surfaces to be painted must be clean, dry, free from dust and loose particles. Carefully remove any rust and old chipping coats and degrease steel and cast iron substrates with extraction naphtha. Stir the primer well before use. Where the coat is to be exposed to high corrosion load it is recommended to apply second coat after approx. 1.5 hours. Topcoat should be applied after 24 hours (or 72 hours for nitrocellulose and chlorinated rubber products). If necessary dilute the primer with solvent intended for alkyd products. Apply with brush, roller or pneumatic spray. Do not apply during atmospheric precipitation and shortly after rainfall while the surface is still wet or if the air humidity is too high.

Technical parameters:
Viscosity               1500 ? 500 mPa*s Brookfield 20rmp disc 3
Density                 1,12 ?  0,05 kg/dm3
Drying time           1,5  h
Shelf-life               24 months

Tools:
Brush, roller, spray station. Wash the tools after use with solvent for alkyd products.

Notes:
All information related to the product is provided for the ambient temperature of +20?C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5?C and +25?C, while relative humidity does not exceed 80%.

Recycling:
The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for metal waste.

Safety measures:
R10            - Flammable
R20            - Harmful by inhalation 
R36/37/38  - Irritating to eyes, respiratory system and skin
S2              - Keep out of the reach of children
S23            - Do not breathe vapour
S24/25       - Avoid contact with skin and eyes
S26            - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S46            - If swallowed seek medical advice immediately and show this container or  label 
S51            - Use only in well-ventilated areas
 
 
 
The limit of VOC according to directive 2004/42/CE for this product: (cat.A/i/SB) 600g/l (2007). The product contains maximum 400g/l.