Detailed Product Description

Description:

Good adherence to substrate
High mechanical strength
High gloss
High coating power
Fast white
Quick-drying
For indoor and outdoor use

Use:

Intended to form protective and decorative gloss coats on substrates made of wood, wood-based materials, plaster and dado previously primed with appropriate paints. Also suitable for painting metal surfaces protected with alkyd rust inhibitor.

Color:

White. Enamel can be coloured using APLAUSE multi-purpose pigments.

Ingredients:

Painter's naphtha, alkyd resin, pigments, additive, fillers.

Capacity:

0,5l; 0,8l

Wear and Tear:

For alkyd products: up to 12 m2/l, single coat, depending on surface type and painting tool used.

Transport and Storage:

RID ADR: UN 1263, class 3 item 31 c, Warning label 3, packaging class III Store in tight containers, in a cool place, at the temperature between +5°C and +25°C.

Method of use:

Surfaces to be painted must be clean, dry, solid, and free from dust and loose particles. Old coats, poorly adhering to substrate must be removed and roughened with sand paper before painting. Voids and cracks in wood and wood -based surfaces must be filled with putty, roughened and primed with primer. Prime not painted wood surfaces with protective impregnant. Degrease and prime metal surfaces with rust inhibiting paint. Stir the enamel well before use. Apply in two layers on previously prepared substrates using brush, roller or spray station. It is recommended to apply next coat after approx. 6 hours. If necessary dilute the enamel with solvent for alkyd products. Optimum painting temperature: +18ºC to +25ºC. Avoid painting in other temperatures and high air humidity.   Do not paint during precipitation and shortly after rainfall while the surface is still wet.  

Technical parameters:

Viscosity             1300 ± 300 mPa*s Brookfield 20rmp disc 3
Density               1,16 ± 0,05 kg/dm3
Drying time         ~6 h
Shelf-life             24 months

Tools:

Brush, roller, spray station. Wash the tools after use with solvent for alkyd products.

Notes:

All information related to the product is provided for the ambient temperature of +20°C and relative humidity of 60%. Working in other conditions will result in an increase or decrease of the product's drying time. Work should be carried out when ambient and ground temperature fluctuates between +5°C and +25°C, while relative humidity does not exceed 80%.

Recycling:

The best way to dispose of the remaining product is to use it up or give to another person. Do not pour into the sewerage system. Dispose of the packaging by placing it in a container for metal waste.

Safety measures:

R10            - Flammable
R20            - Harmful by inhalation 
R36/37/38  - Irritating to eyes, respiratory system and skin
S2              - Keep out of the reach of children
S23            - Do not breathe vapour
S24/25       - Avoid contact with skin and eyes
S26            - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S46            - If swallowed seek medical advice immediately and show this container or  label 
S51            - Use only in well-ventilated areas
 
 
 
The limit of VOC according to directive 2004/42/CE for this product: (cat.A/d/SB) 400g/l (2007). The product contains maximum 380g/l.

Minimum quantity:

1 palette ( 40 pieces )

Payment:

prepayment or T/T

Samples:

available